Nikwax Hammock Waterproofing 300ml

Cotton is highly absorbent and retains water, so it takes a long time to dry once wet. Therefore, it is important to ensure that cotton outer garments and equipment don’t absorb water, as this will cause them to increase in weight and will impair their breathability.
To prevent cotton fabrics from absorbing water Durable Water Repellency (DWR) can be added by applying Nikwax Cotton Proof™.

Other waterproofing products are often solvent-based aerosols; alternatively, they may be water-based and use fluorocarbons. Aerosol products are flammable. Fluorocarbons pose a potential risk to the environment and to the long-term health of the consumer.

Nikwax Cotton Proof™ is a safe product to use on cotton outerwear and equipment. It is WaterBased, non-flammable, contains no harmful volatile organic compounds (VOCs) and is fluorocarbon free.

Additionally, some alternative products are designed for application to multiple fabric types, so are not cotton specific. They are often surface treatments which create a physical barrier to keep water out, but will also impair breathability.

Nikwax Cotton Proof™ has been specifically designed and optimised for cotton, polycotton and canvas, providing Durable Water Repellency (DWR) whilst maintaining breathability. Nikwax Cotton Proof™ requires no heat to develop its DWR, so it is not necessary to use a tumble drier for best results.

Nikwax Cotton Proof™ has been specifically designed and optimised for cotton, polycotton and canvas, to provide Durable Water Repellency (DWR) whilst maintaining breathability.

If your item is made of waxed cotton make sure you use Nikwax Wax Cotton Proof™ for best results.

Nikwax takes great care to minimise the effect of Nikwax products on the environment and on you, the consumer. Nikwax waterproofing products are WaterBased, non-aerosol, non-flammable, non-hazardous and environmentally friendly. They contain no harmful solvents or volatile organic compounds (VOCs), and are completely free of fluorocarbons (which have been shown to be persistent in the environment and have been associated with serious health issues).

Use gloves (to avoid waterproofing your hands!).

1. Immerse clean item(s) in 6L hand-hot water in sink or bowl.
2. Use 50ml for 1 item and 100ml for 2 items.
3. Agitate to mix, leave to soak for 5 minutes, then agitate thoroughly.
4. Rinse with cold water until water runs clear.

Air dry your hammock afterwards.
To maintain waterproofing always wash with Nikwax Tech Wash. Do not use detergents.

Use gloves (to avoid waterproofing your hands!).

• Set up your tent OR protect working surface and lay clean item flat.
• Add 1 part product to 9 parts water and mix well.
• Apply diluted product evenly to outside of wet or dry fabric with a brush or sponge (ensure product penetrates fabric surface). For large items apply in sections.
• As you treat the fabric, remove any surplus product with a damp cloth.
• Check carefully to ensure no areas have been missed.
• After several minutes check for and remove surplus product with a damp cloth*.

*Marks may appear on fabric if excess product is not wiped away. Test on a hidden area first.

Use approximately 50ml of product, prior to dilution, per 3m² of fabric. The coverage is approximate and depends on the condition of the fabric being treated.